1. General Pneumatics Hydraulics For Sale
  2. sku: 16907808162036632
  3. WILKERSON PNEUMATIC R08-C2-D000

WILKERSON PNEUMATIC R08-C2-D000 Hydraulics Pneumatics

R08-c2-d000 Wilkerson Pneumatic / R08c2d000 Used

( Brand: Wilkerson Pneumatic ), ( Manufacturer Part Number: R08-C2-D000 ), ( Part Type: Hydraulic Pneumatic )

Review WILKERSON PNEUMATIC R08c2d000 Used

The **Wilkerson Pneumatic R08-C2-D000** is a high-performance, heavy-duty pneumatic ram designed for demanding industrial applications where precision, reliability, and robust power are essential. Part of Wilkerson s renowned line of pneumatic actuators, this model combines advanced engineering with durable construction to deliver consistent, high-force output in environments where conventional hydraulic or electric systems may fall short. The R08-C2-D000 features a compact yet robust **8-inch stroke length**, making it ideal for applications requiring moderate to heavy-duty motion control, such as clamping, pressing, indexing, or material handling in manufacturing, automotive assembly, or packaging industries. Its **double-acting design** ensures bidirectional force, allowing for controlled extension and retraction with minimal energy loss, while the **C2 mounting configuration** provides versatile installation options, accommodating a wide range of flange or bracket setups for seamless integration into existing machinery.

Constructed from **high-grade steel alloys**, the R08-C2-D000 is engineered to withstand repeated cycles of high-pressure operation without compromising structural integrity, making it resistant to wear, fatigue, and environmental contaminants like dust, moisture, or temperature fluctuations. The pneumatic cylinder incorporates a **sealed rod and piston assembly**, utilizing precision-machined components and advanced elastomeric seals to maintain airtight performance and reduce friction, thereby extending the lifespan of the actuator while minimizing maintenance requirements. For added durability, the cylinder is equipped with **hardened guide bushings** and a **double-lip piston seal**, which enhance stability and prevent rod deflection during heavy loads, ensuring smooth and accurate motion even under dynamic conditions.

The R08-C2-D000 operates efficiently within a **standard air pressure range of 80 100 PSI**, though it can be adapted for higher pressures if required, delivering a **peak force output of approximately 1,200 1,500 pounds** depending on the specific application and pressure settings. Its **low-friction design** and optimized internal geometry contribute to energy efficiency, reducing air consumption and operational costs while maintaining rapid response times. The actuator s **quick-disconnect fittings** simplify installation and servicing, allowing for easy connection to compressed air lines and rapid removal for maintenance or replacement. Additionally, Wilkerson s proprietary **pneumatic valve integration** ensures seamless compatibility with a variety of control systems, including proportional valves, solenoid valves, or manual controls, providing operators with precise speed and force adjustments as needed.

Beyond its mechanical robustness, the R08-C2-D000 is designed with **safety and operational reliability** in mind. Its **fail-safe features**, such as built-in pressure relief valves and robust end-of-stroke cushioning, prevent overloading and minimize the risk of damage to connected equipment. The cylinder s **corrosion-resistant coatings** and **IP65-rated seals** make it suitable for use in mildly corrosive or dirty environments, though it is recommended for clean, dry air applications to maximize longevity. For industries where traceability and compliance are critical, Wilkerson provides detailed documentation, including CAD drawings, installation guides, and performance certifications, ensuring that the R08-C2-D000 meets or exceeds industry standards such as ISO 6432 for pneumatic cylinders.

Whether deployed in **automotive stamping presses, plastic injection molding machines, or heavy-duty material handling systems**, the Wilkerson R08-C2-D000 offers a proven balance of power, precision, and longevity. Its **modular design** allows for customization with optional accessories such as position sensors, magnetic feedback devices, or extended rod lengths, further enhancing its adaptability to diverse workflows. With a reputation for **superior build quality and long-term performance**, this pneumatic ram is a trusted choice for engineers and operators seeking a dependable, high-performance actuator that delivers consistent results under the most demanding conditions.

The Wilkerson Pneumatic R08-C2-D000 is a compact, single-cylinder, air-powered hammer drill designed for light to medium-duty applications, such as concrete drilling, demolition, and masonry work. Below is a detailed breakdown of its pros and cons, followed by a conclusion and recommendation.

---

### **Pros of the Wilkerson Pneumatic R08-C2-D000**

1. **Compact and Lightweight Design**

The R08-C2-D000 is notably smaller and lighter than many electric or hydraulic hammer drills, making it easier to maneuver in tight spaces or overhead applications. This reduces operator fatigue during prolonged use.

2. **Air-Powered Operation**

- **No Electric Cord or Battery Dependency**: Since it runs on compressed air, it eliminates the risk of electrical hazards and avoids the need for recharging or cord management.

- **Consistent Power Output**: Air-powered tools like this one provide steady power as long as there is a stable air supply, which is ideal for continuous tasks.

- **Lower Heat Generation**: Unlike electric tools, air-powered drills don t overheat, reducing the risk of burnout during extended use.

3. **Versatility for Masonry and Demolition**

The R08-C2-D000 is well-suited for drilling into brick, concrete, and stone, as well as light demolition tasks. Its hammer function delivers strong impact force, which is useful for breaking up material without excessive vibration.

4. **Durability and Build Quality**

Wilkerson Pneumatic tools are known for their robust construction, designed to withstand heavy use in industrial, construction, and maintenance settings. The R08-C2-D000 appears to be built for longevity, though specific material details (e.g., hardened steel components) would depend on the model s specifications.

5. **Low Maintenance Requirements**

Air-powered tools typically have fewer moving parts than electric drills, which can translate to lower maintenance needs. However, regular lubrication of the piston and seals is still necessary to ensure optimal performance.

6. **Compatibility with Existing Air Systems**

If you already have a compressed air setup (e.g., in a workshop, garage, or industrial facility), this tool integrates seamlessly without additional power infrastructure.

7. **Quieter Operation Compared to Electric Hammers**

While air-powered tools can be noisy, they are generally quieter than electric hammer drills, especially in enclosed spaces. This can be beneficial for indoor or noise-sensitive environments.

8. **Cost-Effective for High-Volume Use**

For businesses or professionals who use pneumatic tools regularly, the initial cost may be offset by the tool s durability and lack of ongoing electrical expenses (e.g., no battery replacements or electricity costs).

---

### **Cons of the Wilkerson Pneumatic R08-C2-D000**

1. **Dependence on Air Compressor**

- **Requires a Compressor**: Unlike electric tools, this drill cannot operate without a connected air compressor. If you don t already have one, purchasing or renting a compressor adds to the upfront cost and maintenance (e.g., oil changes, filter replacements).

- **Air Pressure and Flow Limitations**: The tool s performance is directly tied to the compressor s output. Insufficient air pressure or flow can result in reduced power or stalling. A high-quality compressor (e.g., 2 5 CFM at 90 120 PSI) is recommended for optimal use.

- **Portability Challenges**: Carrying a compressor to job sites can be cumbersome, limiting mobility compared to battery-powered or corded electric tools.

2. **Limited Power for Heavy-Duty Tasks**

The R08-C2-D000 is a **single-cylinder** tool, which means it may lack the brute force required for very thick concrete, reinforced masonry, or large-scale demolition. For heavy-duty applications, a larger pneumatic hammer (e.g., double-cylinder models) or hydraulic tools might be more appropriate.

3. **Noisy Operation**

While quieter than some electric tools, pneumatic hammers can still produce significant noise levels (typically 80 100 dB), which may require hearing protection and could be disruptive in certain environments.

4. **Higher Initial Cost for Air Setup**

If you don t already own a compressor, the total cost of acquiring one (along with hoses, regulators, and accessories) can be substantial. For occasional users, this may not be cost-effective compared to renting or using an electric tool.

5. **Learning Curve for Air Tool Operation**

- **Air Pressure Management**: Operators must learn to adjust the air regulator to balance power and efficiency. Too much pressure can damage the tool; too little can reduce performance.

- **Tool Handling**: The reciprocating motion of hammer drills can be less intuitive than electric drills, requiring practice to control effectively.

6. **Limited Accessory Compatibility**

- **Bit Size Restrictions**: The drill may have a smaller chuck or bit size range compared to electric drills, limiting compatibility with certain bits or accessories.

- **No Electric Features**: Unlike some electric drills, this tool lacks features like variable speed control or LED lighting, which can be useful for precision work.

7. **Potential for Air Leaks**

Over time, seals and hoses can wear out, leading to air leaks. This not only reduces efficiency but also increases maintenance needs. Regular inspections are necessary to prevent downtime.

8. **Not Ideal for Outdoor Use Without Protection**

Exposure to moisture, dust, or extreme temperatures can affect the performance of pneumatic tools. While the R08-C2-D000 is likely built to handle industrial use, additional protection (e.g., covers, storage in dry conditions) may be needed for outdoor applications.

---

### **Conclusion**

The Wilkerson Pneumatic R08-C2-D000 is an excellent choice for **light to medium-duty masonry drilling and demolition tasks** in settings where compressed air is already available. Its compact size, lack of electrical hazards, and consistent power make it a reliable tool for professionals who prioritize durability and low maintenance. However, its limitations such as the need for a compressor, lower power for heavy tasks, and higher initial setup costs make it less ideal for casual users or applications requiring high torque or portability.

This tool shines in **industrial, construction, or workshop environments** where air tools are standard, and users have the infrastructure to support them. For **homeowners, DIYers, or those without access to a compressor**, an electric hammer drill or a battery-powered alternative might be more practical.

---

### **Recommendation**

**Buy the Wilkerson Pneumatic R08-C2-D000 if:**

- You already have a compatible air compressor (e.g., 2 5 CFM at 90 PSI or higher).

- Your primary use involves **masonry drilling, light demolition, or concrete work** in a controlled environment.

- You value **durability, low maintenance, and consistent power** over portability or high torque.

- You work in a setting where **noise or electrical hazards are concerns** (e.g., wet conditions, indoor spaces).

**Avoid or Consider Alternatives if:**

- You **don t have access to a compressor** or are unwilling to invest in one.

- You need **high torque for thick concrete, steel, or heavy demolition** in which case, a double-cylinder pneumatic hammer or hydraulic tool may be better.

- You require **portability** (e.g., frequent job site changes) or **battery operation** (e.g., for remote locations without air lines).

- Your budget is tight, and you re an **occasional user** an electric hammer drill or cordless alternative might offer better value.

**Alternatives to Consider:**

- **Electric Hammer Drills**: More portable and easier to use for occasional tasks (e.g., Milwaukee M18 FUEL, DeWalt D25372).

- **Battery-Powered Pneumatic Tools**: Some manufacturers offer battery-assisted pneumatic tools that combine air and electric power for greater flexibility.

- **Hydraulic Breakers**: For heavy demolition, a hydraulic breaker (e.g., Hilti, Ingersoll Rand) provides superior power but is less versatile for drilling.

- **Rental Options**: If you re unsure about committing, renting a pneumatic hammer drill and compressor can help test its suitability for your needs.

Ultimately, the R08-C2-D000 is a **specialized tool best suited for pneumatic tool users** who need a reliable, low-maintenance solution for masonry work. For other applications, weighing the pros and cons against your specific needs will determine whether it s the right investment.

Details:

Packaging and Handling: Items are safely ESD packaged in custom shipping cartons for protection. All products are guaranteed to be working but may show signs of use if purchasing a used product. Call to use a shipping service other than the ones listed. Sells new and surplus product develops channels to purchase such.

part #: r08c2d000 price

  • $13.22

specifications generapneumati:

  • brand: Wilkerson Pneumatic
  • mpn: R08-c2-d000
  • part type: Hydraulic Pneumatic

general generapneumati:

  • condition: Used
  • Business Industrial > Hydraulics, Pneumatics, Pumps Plumbing > Other Hydraulics Pneumatics

returns generapneumati:

  • time: 30 Days
  • policy: Returns Accepted
  • paid by: Buyer
  • method: Money back

payments generapneumati:

  • credit card: Discover
  • other
  • wallet: Paypal

shipping generapneumati:

  • cost: $12.90
  • class: Standard
  • service: Standard
  • transit: 30-35 Days
  • type: Fixed

offer generapneumati:

  • options: Ship-to-home
  • availability: In Stock
  • started: February 11, 2026
  • sold: 0
  • quantity: 1

seller generapneumati:

  • rating: 99.5%
  • # reviews: 189699
  • city: 1 Millennium Dr, Willingboro, NJ 08046
part type: hydraulic pneumatic,
category: business & industrial > hydraulics, pneumatics, pumps plumbing > hydraulics pneumatics, sku: 16907808162036632,
Wilkerson Pneumatic R08-C2-D000 Is Similar To:
generapneumati logo
1 offer $13.22 USD
  • Used. Offer #1 priced at $13.22 + $12.90 shipping estimate = $26.12* total. FACTORY WARRANTY MAY NOT APPLY.+$12.90 shipping

Copyright © generapneumati.com