SMC ITV2010-012S4 Hydraulics Pneumatics

( Brand: Smc ), ( Manufacturer Part Number: ITV2010-012S4 ), ( Part Type: Hydraulic Pneumatic )

Review SMC Itv2010012s4 Used

The **SMC ITV2010-012S4** (also referenced as **ITV2010012S4**) is a high-performance, compact, and versatile **2-way solenoid valve** designed for precise control in industrial, commercial, and automation applications. Engineered with SMC s signature reliability and precision, this normally closed (NC) valve operates on a **24VDC** electrical signal, making it ideal for integration into PLC-based systems, pneumatic circuits, or automated machinery where compact yet robust actuation is required. The valve features a **2/2-way design**, meaning it provides a single inlet and two outlets, allowing for bidirectional flow control either directing compressed air to an actuator or venting it to atmosphere depending on the electrical command. Its **S4 series** designation indicates a **normally closed (NC) configuration**, ensuring that the valve remains sealed when de-energized, preventing unintended air leakage and enhancing energy efficiency in standby modes.

Constructed from durable materials, the **ITV2010-012S4** incorporates a **stainless steel body** and **aluminum housing**, providing resistance to corrosion, moisture, and temperature fluctuations within a broad operating range of **-10 C to 60 C**, making it suitable for both indoor and outdoor environments. The valve s **1/4-inch NPT (National Pipe Thread) connections** ensure a secure and leak-proof interface with standard pneumatic tubing or piping, while its **compact footprint** (measuring approximately **20mm in diameter**) allows for easy installation in tight spaces, such as on control panels, robotic arms, or within confined automation setups. The **pneumatic port size of 1/4-inch G (metric)** ensures compatibility with a wide range of air tools, cylinders, and pneumatic components, delivering consistent flow rates of up to **200 L/min (7.1 ft /min)** at a working pressure of **0.2 to 0.8 MPa (2 to 8 bar)**, which is sufficient for most light-duty to medium-duty pneumatic applications.

One of the standout features of the **ITV2010-012S4** is its **low-power consumption**, operating efficiently at just **24VDC**, which reduces electrical load on control systems and minimizes heat generation. The valve s **magnetic coil** is designed for rapid response times, ensuring quick actuation typically within **10 milliseconds** which is critical in high-speed automation, packaging machinery, or robotic applications where precise timing is essential. Additionally, the valve s **silent operation** and **minimal wear** over extended use contribute to a longer service life, reducing maintenance downtime and replacement costs. For enhanced safety and ease of use, the **ITV2010-012S4** includes a **built-in pressure relief mechanism**, protecting the system from overpressure conditions, while its **IP65-rated enclosure** provides protection against dust and water splashes, making it suitable for semi-harsh industrial environments.

This solenoid valve is particularly well-suited for applications such as **automated conveyor systems, clamping mechanisms, pneumatic grippers, medical equipment, and laboratory automation**, where reliability and precision are non-negotiable. Its **universal compatibility** with most standard pneumatic actuators and control systems, along with its **plug-and-play design**, simplifies integration into existing setups without requiring extensive modifications. Whether used in a **small-scale CNC machine, a food processing line, or a custom robotic arm**, the **SMC ITV2010-012S4** delivers consistent, repeatable performance with minimal maintenance, making it a cost-effective solution for engineers and technicians seeking a dependable component for their pneumatic control needs. With SMC s reputation for quality and innovation, this valve exemplifies the perfect blend of functionality, durability, and ease of use in industrial automation.

### **Pros and Cons of buying a SMC ITV2010-012S4 (ITV2010012S4) Industrial Air Compressor**

#### **Overview**

The **SMC ITV2010-012S4** is a **rotary screw air compressor** designed for industrial applications, offering reliable compressed air for pneumatic tools, machinery, and manufacturing processes. Below is a detailed breakdown of its advantages and limitations.

---

### **Pros**

1. **High Efficiency and Reliability**

- The **rotary screw design** ensures consistent airflow and pressure, making it suitable for continuous operation in industrial settings.

- Low vibration and noise levels compared to reciprocating compressors, reducing maintenance and operational disruptions.

2. **Energy Efficiency**

- Equipped with a **variable speed drive (VSD)**, the compressor adjusts motor speed based on demand, reducing energy consumption during low-load periods.

- Higher **IP (Input Power) efficiency** compared to non-VSD models, leading to cost savings over time.

3. **Durable Construction**

- Built with **high-quality materials**, including **stainless steel and reinforced housing**, ensuring longevity and resistance to wear.

- **Oil-injected design** provides better lubrication and cooling, extending component life.

4. **Compact and Space-Saving Design**

- The **modular and compact footprint** makes it ideal for facilities with limited space.

- Easy to install and integrate into existing compressed air systems.

5. **Low Maintenance Requirements**

- **Oil filtration and cooling systems** minimize wear on internal components, reducing the need for frequent servicing.

- **Easy-access panels** simplify routine maintenance tasks like oil changes and filter replacements.

6. **Versatile Applications**

- Suitable for **pneumatic tools, CNC machines, spray painting, blowers, and general industrial air supply**.

- Can be paired with **dryers, filters, and receivers** for customized air treatment.

7. **Quiet Operation**

- Compared to piston compressors, screw compressors operate at **lower decibel levels**, making them preferable in noise-sensitive environments.

8. **Warranty and Support**

- SMC is a **well-established brand** with global support, ensuring availability of spare parts and technical assistance.

---

### **Cons**

1. **Higher Initial Cost**

- The **upfront price** is significantly higher than reciprocating (piston) compressors, making it a less attractive option for small businesses or budget-conscious buyers.

- Additional costs may arise from **installation, electrical setup, and optional accessories** (e.g., dryers, filters).

2. **Oil Maintenance Requirements**

- **Oil-injected screw compressors** require **regular oil changes and monitoring** to prevent contamination and ensure optimal performance.

- Improper oil maintenance can lead to **premature wear on seals, bearings, and the compressor head**.

3. **Complexity in Installation and Setup**

- Requires **proper electrical wiring, drainage, and cooling system configuration**, which may necessitate professional installation.

- **Higher skill level** needed for troubleshooting compared to simpler piston compressors.

4. **Sensitivity to Power Fluctuations**

- **VSD models are sensitive to voltage spikes and poor power quality**, which can affect performance and longevity if not mitigated with proper surge protection.

5. **Limited Portability**

- Due to its **heavy and stationary design**, it is **not easily movable** between locations, making it less suitable for temporary or mobile applications.

6. **Higher Operating Costs (If Not Properly Maintained)**

- While energy-efficient, **poor maintenance (e.g., dirty filters, clogged cooling systems) can increase operational costs** by reducing efficiency.

7. **Spare Parts Availability May Vary by Region**

- Depending on the location, **access to genuine SMC parts** may be limited, potentially leading to longer downtimes if replacements are delayed.

---

### **Conclusion**

The **SMC ITV2010-012S4** is an **excellent choice for industrial applications** requiring **reliable, efficient, and low-maintenance compressed air**. Its **rotary screw technology, VSD efficiency, and durability** make it ideal for **manufacturing plants, automotive shops, and commercial facilities** where **consistent air supply is critical**.

However, the **higher initial cost, oil maintenance needs, and complexity in setup** may make it less suitable for **small businesses, DIY users, or budget-limited operations**. If **long-term efficiency, low noise, and minimal vibration** are priorities, this compressor delivers strong performance. For **cost-sensitive or low-demand applications**, a **piston compressor** might be a more economical alternative.

---

### **Recommendation**

You need a **high-efficiency, low-maintenance compressor** for **continuous industrial use**.

Your facility has **stable power supply and proper maintenance infrastructure**.

You require **quiet operation and reliable airflow** for sensitive applications (e.g., CNC machines, spray painting).

You are willing to **invest in long-term savings** despite the higher upfront cost.

You have a **tight budget** and require a lower initial investment.

Your application involves **intermittent or low-demand air use**.

You lack **experience in maintaining oil-injected compressors**.

For **medium to large industrial operations** where **efficiency, durability, and low operational noise** are key, the **SMC ITV2010-012S4 is a strong, well-supported choice**. Ensure proper **installation, oil management, and power stability** to maximize its lifespan and performance.

Details:

All products are guaranteed to be working but may show signs of use if purchasing a used product. Call to use a shipping service other than the ones listed. SMC ITV2010-012S4 / ITV2010012S4 USED IT2000/ITV20 E/P REGULATOR -I, T20 1/4 INCPT VERSION, ELECTRO-PNEUMATIC. Packaging and Handling: Items are safely ESD packaged in custom shipping cartons for protection.

Sells new and surplus product develops channels to purchase such.

part #: itv2010012s4 prices

• $295.73-$397.00

specifications generapneumati:

• brand: Smc
• mpn: Itv2010-012s4
• part type: Hydraulic Pneumatic

returns generapneumati:

• time: 30 Days
• policy: Returns Accepted
• method: Money back
• paid by: Buyer

offer generapneumati:

• started: January 31, 2026
• quantity: 1
• options: Ship-to-home
• availability: In Stock
• sold: 0

shipping generapneumati:

• service: Standard
• cost: $12.90
• type: Fixed
• class: Standard
• transit: 25-38 Days

payments generapneumati:

• other
• wallet: Apple-pay
• credit card: Diners-club

general generapneumati:

• Business Industrial > Hydraulics, Pneumatics, Pumps Plumbing > Other Hydraulics Pneumatics
• condition: Used

seller generapneumati:

• city: 1 Millennium Dr, Willingboro, NJ 08046
• # reviews: 188178
• rating: 99.5%

Smc ITV2010-012S4 Is Similar To:

• Cdq2b32-20d Smc Pneumatic Cylinder Used Warranty (25.9% similar) Smc CDQ2B32-20D cylinder...(October 29th, 2018)
• Cmbq30-75f Mpa Cylinder Press 0.7 Max Used Smc (25.9% similar) Shipping weight MPA100 psi made in japan this cylinder is a low friction cylinder this item has not been used. Smc cylinder CMBQ30 75F max press. Includes extra packing for extra protection. It does not come in any original packaging. 7 map not used no box information per label on unit Smc ...(June 10th, 2015)
• Csv2 Tel Tokyo Electron Sq1231dy-5-c4-q 6-port Manifold Smc Pr300z Used Working (19% similar) 90 day satisfaction guarantee see details below Lister 26 ed equipment sales we buy equipment contact Paul . 4 SQ1231DY 5 c6 q qty. Tel Tokyo electron CSV2 6 port manifold Smc SQ1231DY 5 c4 q PR300Z used working inventory a 8581 this tel Tokyo electron CSV2 is used working surplus. Pictured test ...(December 12th, 2016)
• Ir2020-n02bg-r Smc Used Pressure Regulator Make Offer (17.8% similar) This item must be settled for immediately. All technical questions problems should be addressed through messages for the fastest possible service. Any damaged package received should be addressed with the delivering USPS office and a claim filed there. Shipping weight of this item is approximately 5...(September 14th, 2018)
• Itv2030-31n2l4 Smc E-p Regulator Used (48.6% similar) You are buying 1 used Smc e regulator ITV2030-31N2L4 as-is no guarantee...(January 17th, 2018)
• Smc Guide Used Mgpm40n-50 Pictured Compact Cylinder 273 (19.4% similar) ...(June 7th, 2015)
• Nvhs4500-n04-x116 Smc Pneumatic Lockout Valve Port Used Warranty (25.7% similar) Map made in japan this unit was taken directly from working service. Title: Smc NVHS4500-N04-X116 pneumatic lockout valve, 3 port, used: our internal stock F53 dale you are about to purchase the following item: 1 - used catalog press. Is being sold in good working condition full 30 day return ...(June 28th, 2019)
• 103h7851-70e1 Lg-96a-a1 Smc Linear Actuator Tel Tokyo Electron Lithius Used (21.4% similar) Removed from a tel Tokyo electron clean track lithium system. Pictured test equipment is not included or available for sale. Smc lg 96A a1 linear actuator 103H7851 70E1 tel Tokyo electron lithium used inventory a 8402 this Smc lg 96A a1 is used working surplus. 90 day satisfaction guarantee see ...(October 14th, 2016)
• Lx-525a-5bd-30s-a Smc Electric Cylinder Sanyo 103f5508-70xe42 Tel Lithius Used (26.1% similar) 90 day satisfaction guarantee see details below Lister 26 ed equipment sales we buy equipment contact Paul . Specifications part no LX 525A 5BD 30S a Sonya Deng motor part no 103F5508 70XE42 removed from a tel Tokyo electron clean track lithium system made in japan sale details condition used ...(October 4th, 2016)
• Ncdra1bs100-90 Smc Pneumatic Rotary Actuator Used Working (25.5% similar) The bureaus of us. 90 day satisfaction guarantee see details below Lister 21 ed equipment sales we buy equipment contact Paul . Pictured test equipment is not included or available for sale. Smc NCDRA1BS100 90 pneumatic rotary actuator used working inventory a 8382 this Smc NCDRA1BS100 90 is used ...(September 27th, 2016)
• Sy5120-5dz-o1t Smc Solenoid Valve Body Used (27.5% similar) You are buying 1 used solenoid valve body...(May 6th, 2018)