ASHCROFT 451279SS-04L-0-1000 Hydraulics Pneumatics

( Brand: Ashcroft ), ( Manufacturer Part Number: 451279SS-04L-0-1000 ), ( Part Type: Hydraulic Pneumatic )

Review ASHCROFT 451279ss04l01000 Used

The **Ashcroft 451279SS-04L-0-1000** is a high-performance, stainless steel ball valve designed for demanding industrial applications where reliability, durability, and precise flow control are paramount. This valve belongs to the **Ashcroft 451279 series**, a line of robust, full-port ball valves engineered for use in harsh environments, including oil and gas, chemical processing, water treatment, and power generation systems. Constructed from **316 stainless steel**, the valve body and trim components are built to withstand extreme temperatures, high pressures, and corrosive substances, ensuring long-term operational integrity even in the most aggressive fluid handling scenarios.

The **04L designation** indicates a **4-inch (100mm) nominal size**, making it suitable for medium to large-scale piping systems where efficient flow regulation is critical. The valve features a **full-port design**, meaning the internal passage is equal to the pipe diameter, minimizing pressure drop and maximizing flow capacity without compromising on throttling capability. The **SS (Stainless Steel) trim** ensures resistance to wear and corrosion, while the **0-1000** designation likely refers to a pressure rating of **1000 psi (Class 1500)**, though exact specifications should be verified against the manufacturer s documentation. This high-pressure rating makes it ideal for applications requiring tight sealing under significant backpressure, such as in refineries, desalination plants, or high-pressure gas transmission lines.

One of the standout features of this valve is its **floating ball design**, which provides a secure seal against the seat rings, preventing leakage while allowing for smooth operation. The **Teflon or PTFE-coated seats and ball** further enhance its resistance to chemical degradation and reduce friction, ensuring low torque operation and extended service life. The valve is equipped with a **lug-style body configuration**, which allows for easy installation and removal without disrupting the piping system, making maintenance and replacement straightforward. Additionally, the **welded bonnet design** reinforces structural integrity, reducing the risk of leaks at the bonnet-to-body interface a common failure point in high-pressure applications.

For enhanced safety and operational efficiency, the **Ashcroft 451279SS-04L-0-1000** is often paired with **Ashcroft s proprietary sealing and lubrication systems**, such as their **Viton or EPDM seals**, which provide superior resistance to a wide range of fluids, including hydrocarbons, acids, and solvents. The valve s **manual lever handle** (or optional electric/actuated versions) allows for easy manual operation, though it can also be integrated into automated control systems for remote or automated process management. The **smooth, polished finish** of the stainless steel components not only improves aesthetic appeal but also reduces the likelihood of particle buildup, which is crucial in applications where cleanliness and contamination control are critical.

In summary, the **Ashcroft 451279SS-04L-0-1000** is a premium-grade, full-port ball valve engineered for extreme reliability in high-pressure, corrosive, or abrasive environments. Its **316 stainless steel construction**, **full-port flow path**, and **high-pressure rating** make it a versatile solution for industries requiring precise flow control, minimal maintenance, and long-term performance. Whether used in oil and gas extraction, chemical processing, or water treatment facilities, this valve delivers the durability and precision needed to maintain efficient and safe operations under the most demanding conditions.

### **Pros and Cons of buying a Ashcroft 451279SS-04L-0-1000 (Stainless Steel, 4-Liter, 1000 PSI)**

#### **Overview**

The **Ashcroft 451279SS-04L-0-1000** is a **stainless steel, 4-liter (4L) pressure gauge** rated for **1000 PSI (pounds per square inch)**. It is commonly used in **hydraulic systems, industrial applications, automotive, and high-pressure environments**. Below is a detailed breakdown of its advantages and disadvantages.

---

### **Pros**

1. **High Pressure Rating (1000 PSI)**

- Suitable for **heavy-duty hydraulic systems, automotive transmissions, and industrial machinery** where pressures exceed 1000 PSI.

- More durable than lower-rated gauges in high-stress applications.

2. **Stainless Steel Construction (SS-04L)**

- **Corrosion-resistant**, making it ideal for **outdoor, marine, or chemically aggressive environments**.

- Longer lifespan compared to aluminum or brass gauges in harsh conditions.

- Better resistance to **moisture, saltwater, and chemical exposure**.

3. **Large 4-Liter (4") Dial Size**

- **Easier to read** from a distance, reducing operator fatigue in industrial settings.

- Better visibility in **low-light or high-vibration environments**.

4. **Durable and Rugged Design**

- Built for **industrial use**, with reinforced casing and sealed mechanisms to prevent leaks.

- Often comes with **flanged or threaded connections** for secure mounting.

5. **Wide Compatibility**

- Fits standard **1/2" NPT or 1/2" BSP threads**, making it versatile for various systems.

- Commonly used in **hydraulic presses, forklifts, agricultural equipment, and off-road vehicles**.

6. **Accurate and Reliable Measurements**

- High-quality **bourdon tube mechanism** ensures precise pressure readings.

- Less prone to **drift or inaccuracies** compared to cheaper gauges.

7. **Long-Term Cost Efficiency**

- Despite a higher upfront cost, its **durability reduces replacement frequency**, saving money over time.

- Lower maintenance needs in corrosive environments.

8. **Brand Reputation (Ashcroft)**

- **Ashcroft is a trusted manufacturer** in the pressure gauge industry, known for **precision and reliability**.

- Often used in **OEM applications** (original equipment manufacturing).

---

### **Cons**

1. **Higher Initial Cost**

- More expensive than **basic aluminum or brass gauges** (e.g., $50 $150 vs. $10 $30 for lower-end models).

- May not be cost-effective for **low-pressure, short-term, or non-industrial uses**.

2. **Heavier and Bulkier**

- The **4" dial and stainless steel casing** make it **heavier and less portable** than smaller gauges.

- May require **reinforced mounting points** to prevent vibration damage.

3. **Potential for Overkill in Low-Pressure Systems**

- If used in **low-pressure applications (e.g., HVAC, plumbing)**, the **1000 PSI rating is unnecessary**, leading to **wasted investment**.

- A **lower-rated gauge (e.g., 100 600 PSI)** would suffice and be more cost-effective.

4. **Sensitivity to Vibration (If Not Properly Mounted)**

- High-vibration environments (e.g., **construction, marine**) can cause **needle wobble or inaccurate readings** if the gauge is not **properly damped or mounted**.

- Requires **shock mounts or vibration absorbers** in extreme cases.

5. **Limited Color Options**

- Typically comes in **standard white or black dials** with **black or white markings**.

- Custom color coding (e.g., for different pressure ranges) may require additional ordering.

6. **Potential for Calibration Drift Over Time**

- While durable, **high-quality gauges still require periodic calibration** (especially in **critical industrial applications**).

- Neglecting calibration can lead to **inaccurate readings**, risking system failures.

7. **Not Ideal for Extreme Temperatures (Without Special Features)**

- Standard models may **struggle in sub-zero or high-heat environments** unless specified as **temperature-compensated**.

- Some industrial versions require **additional sealing or insulation**.

8. **Replacement Parts May Be Less Common**

- While Ashcroft is reliable, **replacement dials or tubes** may be harder to find than for **more mass-market brands**.

- Requires **verified suppliers** to ensure compatibility.

---

### **Conclusion**

The **Ashcroft 451279SS-04L-0-1000** is a **superior choice for high-pressure, industrial, or corrosive environments** where **durability, accuracy, and longevity** are critical. Its **stainless steel construction, large dial size, and 1000 PSI rating** make it ideal for **hydraulic systems, automotive transmissions, marine applications, and heavy machinery**.

However, for **low-pressure, non-industrial, or budget-sensitive applications**, a **lower-rated, aluminum or brass gauge** would be more practical. The **higher cost and weight** may not justify the purchase unless the gauge is **essential for the specific use case**.

---

### **Recommendation**

You need a **high-pressure (1000 PSI) gauge** for **industrial, hydraulic, or automotive use**.

Your application involves **corrosive environments (saltwater, chemicals, outdoor exposure)**.

You require **large, easy-to-read dials** in **high-vibration or low-light settings**.

You prioritize **long-term reliability and minimal maintenance**.

You only need a **low-pressure gauge** (e.g.,

Your budget is **strictly limited**, and a cheaper gauge suffices.

The gauge will be **frequently moved or exposed to extreme vibrations without proper mounting**.

You require **custom color coding or non-standard features** not supported by Ashcroft s standard models.

- For **lower pressure needs**, consider **Ashcroft s 600 PSI or 1000 PSI aluminum models** (e.g., **451279AL-04L-0-1000**).

- For **extreme temperature applications**, look for **temperature-compensated or explosion-proof models**.

- If **cost is a concern**, check for **authentic used/refurbished gauges** from reputable suppliers.

This gauge is a **strong investment for professional and industrial use** but may be **overkill for casual or low-pressure applications**. Always **verify compatibility with your system s pressure and environmental conditions** before purchasing.

Details:

Sells new and surplus product develops channels to purchase such. All products are guaranteed to be working but may show signs of use if purchasing a used product. Call to use a shipping service other than the ones listed. Packaging and Handling: Items are safely ESD packaged in custom shipping cartons for protection.

part #: 451279ss04l01000 price

• $190.07

specifications generapneumati:

• brand: Ashcroft
• mpn: 451279ss-04l-0-1000
• part type: Hydraulic Pneumatic

returns generapneumati:

• paid by: Buyer
• method: Money back
• time: 30 Days
• policy: Returns Accepted

general generapneumati:

• Business Industrial > Hydraulics, Pneumatics, Pumps Plumbing > Other Hydraulics Pneumatics
• condition: Used

offer generapneumati:

• options: Ship-to-home
• availability: In Stock
• started: February 3, 2026
• sold: 0
• quantity: 1

seller generapneumati:

• city: 1 Millennium Dr, Willingboro, NJ 08046
• # reviews: 188661
• rating: 99.5%

payments generapneumati:

• other
• wallet: Google-pay
• credit card: Visa

shipping generapneumati:

• transit: 31-36 Days
• class: Standard
• type: Fixed
• cost: $12.90
• service: Standard

Ashcroft 451279SS-04L-0-1000 Is Similar To:

• 45-1279as-2l Ashcroft Pressure Gauge Psi Used Qty (37.6% similar) Ashcroft 45-1279AS-2L pressure gauge 30 psi 5-INCH - nos used in good condition. Some Teflon tape on not fitting...(October 20th, 2018)
• 10000 1756-ba1 Allen Bradley Ashcroft Portable Gauge Tester 1305 B Psi Used (31.5% similar) Ashcroft portable gauge tester 1305 b psi use did JD 226LOCATION b1 c1 S402 05 16...(May 19th, 2016)
• Ashcroft Lpsn4gv25 Xfm2c Lpsn4gv25xfm2c Used (42.9% similar) Call to use a shipping service other than the ones listed. Sells new and surplus product develops channels to purchase such. Packaging and handling: items are safely eds packaged in custom shipping cartons for protection. All products are guaranteed to be working but may show signs of use if ...(February 8th, 2026)
• Ashcroft 048-21 Used Gauge (48.7% similar) Used Ashcroft gauge 048-21...(March 12th, 2026)