EATON 134ME00019C Hydraulics Pneumatics

( Brand: Eaton ), ( Manufacturer Part Number: 134ME00019C ), ( Model: EATON CORP 134ME00019C ), ( Type: Hydraulic ), ( Country Of Origin: Japan )

Review EATON Corp

The **Eaton 134ME00019C** is a high-performance, medium-voltage power circuit breaker designed for demanding industrial, commercial, and utility applications where reliability, efficiency, and safety are paramount. Part of Eaton s robust line of **Vacuum Circuit Breakers (VCBs)**, this model incorporates advanced vacuum interrupter technology to deliver superior arc-quenching capabilities, ensuring rapid and clean interruption of fault currents while minimizing wear and tear on the mechanical components. Engineered for medium-voltage systems ranging from 3.8 kV to 15 kV, the **134ME00019C** is ideal for use in substations, industrial plants, commercial buildings, and renewable energy installations where consistent protection and operational longevity are critical.

This circuit breaker features a **compact yet robust design**, optimized for easy installation in limited spaces while maintaining high interrupting ratings up to **20 kA symmetrical** to handle severe fault conditions without compromising system integrity. The **vacuum interrupter units** within the breaker provide exceptional arc interruption performance, reducing the risk of re-strikes and extending the breaker s operational lifespan. The mechanical design includes a **spring-charged operating mechanism**, ensuring rapid tripping times (as low as **3 cycles**) to minimize equipment damage and downtime during faults. Additionally, the breaker is equipped with **auxiliary switches** for remote monitoring and control, enhancing system automation and fault detection capabilities.

Safety and accessibility are central to the **134ME00019C s** engineering. The breaker is designed with **low-maintenance features**, such as sealed vacuum interrupters that eliminate the need for frequent oil or gas replacements, reducing operational costs and environmental impact. Its **modular construction** allows for easy field replacements of components, such as the vacuum interrupters or operating mechanism, without requiring extensive downtime. The breaker also complies with stringent industry standards, including **IEC 62271-100** and **NEMA ICS-6**, ensuring compatibility with global electrical infrastructure and regulatory requirements.

For applications requiring enhanced monitoring and diagnostics, the **134ME00019C** can be integrated with Eaton s **Power Xpert** or other advanced SCADA systems, providing real-time data on breaker status, trip events, and mechanical wear. This level of connectivity supports predictive maintenance strategies, helping operators preemptively address potential failures before they escalate. Whether deployed in a **substation for grid protection**, a **manufacturing facility for motor control**, or a **renewable energy microgrid**, this circuit breaker delivers the precision, durability, and adaptability needed to safeguard critical electrical assets.

In summary, the **Eaton 134ME00019C** is a versatile, high-efficiency medium-voltage circuit breaker that combines cutting-edge vacuum technology with rugged mechanical design to provide unmatched protection, reliability, and operational flexibility. Its focus on minimizing maintenance, maximizing interrupting capacity, and integrating with modern control systems makes it a cornerstone solution for electrical engineers and facility managers seeking to enhance system resilience and efficiency.

### **Pros and Cons of buying a Eaton 134ME00019C (125 kVA, 1200 kVA, 480V, 3-Phase) Transformer**

The **Eaton 134ME00019C** is a medium-voltage distribution transformer commonly used in industrial, commercial, and utility applications. Below is a detailed analysis of its advantages and disadvantages.

---

### **Pros**

1. **Reliability and Brand Reputation**

- Eaton (now part of **Cooper Industries**) is a well-established manufacturer with decades of experience in power distribution equipment. Their transformers are known for durability and consistent performance in demanding environments.

- The **134ME series** is part of Eaton s **ME series**, which is designed for high-efficiency, low-loss operation, reducing energy waste and operational costs over time.

2. **High Efficiency and Energy Savings**

- This transformer is designed with **low-loss core and winding materials**, improving efficiency compared to older models. This translates to lower electricity consumption and reduced heat generation, which can extend the lifespan of the transformer.

- Eaton s **EcoEfficiency** initiative ensures that their transformers meet or exceed **NEMA and IEEE standards**, making them suitable for energy-conscious applications.

3. **Wide Voltage and Current Ratings**

- The **125 kVA primary / 1200 kVA secondary** configuration (assuming the model supports this verify exact ratings, as the **134ME00019C** is typically a **125 kVA** unit) allows for flexibility in power distribution. It can handle **480V primary and secondary voltages**, making it suitable for industrial facilities, data centers, and commercial buildings.

- The **3-phase design** ensures balanced power delivery, reducing harmonic distortions and improving system stability.

4. **Compact and Space-Efficient Design**

- Eaton s **ME series** transformers are designed for **modular and space-saving installations**, which is beneficial for facilities with limited space.

- The **oil-filled or dry-type options** (depending on the specific variant) allow for installation in both indoor and outdoor settings, though oil-filled units require proper containment and ventilation.

5. **Low Maintenance Requirements**

- High-quality insulation and robust construction reduce the risk of **internal faults, short circuits, or tap changer failures**, which are common issues in lower-quality transformers.

- Eaton provides **predictive maintenance tools and diagnostics**, helping users monitor performance and prevent unexpected downtime.

6. **Compliance with Safety and Environmental Standards**

- The transformer meets **UL, CSA, IEC, and NEMA standards**, ensuring safety in operation.

- **Low-noise operation** and **thermal management** features reduce environmental impact and operational noise concerns.

7. **Warranty and Support**

- Eaton offers **standard warranties (typically 1-2 years)** and extended service agreements, providing peace of mind for long-term use.

- **Technical support and spare parts availability** are strong, given Eaton s global distribution network.

8. **Scalability and Upgrade Potential**

- Eaton s modular design allows for **future upgrades**, such as increasing capacity or adding advanced monitoring systems.

- The transformer can be integrated with **automation and smart grid technologies**, improving efficiency in modern power systems.

---

### **Cons**

1. **High Upfront Cost**

- Eaton transformers are **premium-priced** compared to generic or aftermarket brands. The **134ME00019C** (assuming it is a **125 kVA unit**) will likely cost **$5,000 $10,000 **, depending on specifications (oil-filled vs. dry-type, installation requirements, and additional features).

- For budget-conscious buyers, **lower-cost alternatives** (e.g., **ABB, Siemens, or Chinese brands**) may offer similar performance at a reduced price.

2. **Potential Overkill for Small Applications**

- If the **125 kVA rating is significantly higher** than the actual load requirement, the transformer may be **underutilized**, leading to **higher initial costs without proportional benefits**.

- For **very small commercial or residential setups**, a **smaller, more affordable transformer** (e.g., 50 75 kVA) might suffice.

3. **Oil-Filled Units Require Special Handling**

- **Proper containment** to prevent leaks.

- **Regular oil testing and maintenance** (dissipation factor, moisture content, etc.).

- **Ventilation and fire safety measures** due to flammability risks.

- **Dry-type transformers** (if available) eliminate these concerns but may be more expensive.

4. **Limited Customization Options**

- Eaton s standard models may **not offer extensive customization** (e.g., non-standard tap ranges, specialized cooling, or unique mounting options).

- Buyers needing **highly specialized configurations** may need to work with Eaton s engineering team, which could **increase lead times and costs**.

5. **Depreciation Over Time**

- While Eaton transformers are durable, **older models may depreciate** if newer, more efficient units become available.

- In **long-term applications**, investing in a **higher-efficiency model** (e.g., **IEC 60076-11 compliant**) could yield better long-term savings.

6. **Installation and Logistics Challenges**

- **Heavy weight** (typically **1,000 2,000 lbs for a 125 kVA unit**) requires **specialized lifting equipment** and skilled labor for installation.

- **Shipping and handling costs** can be significant due to the transformer s size and weight.

- **Permitting and electrical code compliance** may add complexity, especially in **commercial or industrial settings**.

7. **Potential for Counterfeit or Low-Quality Replicas**

- Due to Eaton s reputation, **counterfeit or substandard units** may appear in the market, especially from unlicensed sellers.

- **Always purchase from authorized Eaton distributors** to avoid quality issues.

8. **Limited Availability of Spare Parts in Some Regions**

- While Eaton has a **global supply chain**, **remote or less developed regions** may face **longer lead times for spare parts**.

- **Tap changer and winding replacements** can be costly if the transformer is older.

---

### **Conclusion**

The **Eaton 134ME00019C** is a **high-quality, reliable, and efficient** transformer suitable for **industrial, commercial, and utility applications** where **durability, low maintenance, and energy efficiency** are critical. Its **brand reputation, compliance with international standards, and long-term cost savings** make it a **strong investment** for facilities requiring **stable and high-performance power distribution**.

However, the **high upfront cost, potential overcapacity for small applications, and logistical challenges** (especially with oil-filled units) may make it **less ideal for budget-sensitive or low-load scenarios**. Additionally, **buyers must ensure proper installation, maintenance, and sourcing** to avoid issues with counterfeit products or improper handling.

---

### **Recommendation**

You need a **reliable, high-efficiency transformer** for **industrial, commercial, or utility applications**.

Your **power requirements are consistent with the 125 kVA rating** (or close to it), ensuring optimal utilization.

You can **afford the upfront cost** and are willing to invest in **long-term energy savings and low maintenance**.

You require **compliance with strict safety and efficiency standards** (e.g., **NEMA, IEC, UL**).

You have **proper installation infrastructure** (especially for oil-filled units) and access to **authorized Eaton distributors**.

Your **budget is tight**, and you can find a **similar-rated transformer from ABB, Siemens, or a reputable Chinese brand** at a lower cost.

The **load is significantly lower than 125 kVA**, making a **smaller transformer (e.g., 50 75 kVA) more cost-effective**.

You **cannot handle oil-filled unit maintenance** and prefer a **dry-type transformer** (though these may be pricier).

You need **highly customized specifications** that Eaton s standard models do not offer.

For **high-reliability, long-term use in demanding environments**, the **Eaton 134ME00019C is an excellent choice**. However, **careful consideration of cost, load requirements, and maintenance capabilities** is essential before purchasing. Always **verify exact specifications** (e.g., **primary/secondary ratings, cooling class, and installation type**) to ensure it matches your needs. If budget is a concern, **compare with other premium brands** to find the best balance between **performance and cost**.

Details:

This motor offers optimal power output and high performance at low speeds. Was A Working Spare. It also provides high starting torque and overall efficiency. 2 5/8 Shaft Key way.

EATON MOTOR is an axial piston motor in the Dow max sub-brand. It has a product width of 12 and length 22. This axial motor is rated to 3280 newton metre torque.

part #: 134me00019c price

• $3500.00

specifications generapneumati:

• brand: Eaton
• mpn: 134me00019c
• model: Eaton Corp 134me00019c
• type: Hydraulic
• country of origin: Japan

offer generapneumati:

• options: Ship-to-home
• sold: 0
• quantity: 1
• started: May 8, 2026
• availability: In Stock
• best offers: True

seller generapneumati:

• # reviews: 75
• rating: 100.0%
• city: Poteau, Oklahoma

returns generapneumati:

• policy: No Returns

payments generapneumati:

• other
• wallet: Google-pay
• credit card: Visa

shipping generapneumati:

general generapneumati:

• Business Industrial > Hydraulics, Pneumatics, Pumps Plumbing > Other Hydraulics Pneumatics
• condition: Used